Browse our complete collection of benchtop drill press reviews, floor drill guides, chuck & vise setups, and maintenance tips.
When people say they want to remove the spindle from a JT33 drill press, they usually mean a press whose chuck mounts on a JT33 taper, and what they actually need to pull apart depends on the job: getting the chuck off the arbor, dropping the whol...
You hit the switch and the motor just hums, or it groans up to speed and stalls the moment a bit touches wood. Maybe it smells faintly hot. Before you spend on an IMS DP-5B drill press motor replacement, it pays to be sure the motor is actually th...
The first time I tried to drill a row of evenly spaced holes in a small brass plate, I did what most people do. I marked each center with a punch, eyeballed the alignment, and clamped the piece down by hand. Three holes in, the pattern wandered. T...
There is a moment every new metalworker hits: the drill press is running, the bit is sharp, and the hole still comes out wrong. Oversized, ragged, or walked off the mark. Nine times out of ten the machine is fine and the problem is a mismatch betw...
A benchtop drill press is a capable machine trapped in a small footprint, and often the thing holding it back is literally what it sits on. Build it a proper stand and two things happen: it rises to a comfortable working height, and it gains a rig...
The honest truth is this: most people don't need a new machine. They need a better-configured version of the machine they already own.
There is a specific kind of annoyance that arrives the day the return spring quits. You drill a hole, let go of the feed handle, and the quill just hangs there instead of gliding back up. Now every hole means lifting the spindle by hand, and the m...
It is a tempting shortcut. You have a drill press, you have a curved edge to smooth, and a sanding drum costs a few dollars and drops right into the chuck. So why buy a whole spindle sander? The honest answer is that a drill press will do light sa...
Two woodworkers build the same tea-light holder. One comes out with clean, identical recesses and dowels that seat flush; the other has scorched holes and a wobbly joint. Same project, same bits, often the same press. The difference is setup: how ...
The idea has a strong pull, and it keeps coming back in shop forums and video titles: you already own a drill press, so why not convert it into a milling machine and save the cost of a mill? Understanding what that conversion actually means, and w...
You find a Craftsman 25921 in a garage sale box, bring it home, and start searching for a manual before you bolt anything together. Smart move. The 25921 is not what most people picture when they hear "drill press," and understanding what this sta...
The Delta Rockwell 15-665 is a classic 15 inch drill press, prized enough that owners restore them decades on, and the cast iron table is a part that often needs attention: cracked from a fall, warped, badly pitted, or simply missing when the pres...
