Finding the Right Craftsman Drill Press 335.25926 Manual: Model, Version, and Parts Checks
The Craftsman 335.25926 is a compact benchtop drill press from the later Craftsman product line — after the Sears era but still under the original brand ownership. It’s an 8-inch swing machine with five speeds, designed for home-shop light duty work. Finding the correct manual and parts for it requires a different approach than the older 113-series machines.
The 335 Model Number System
Craftsman model numbers starting with 335 represent a product series distinct from the 113-series and 103-series machines. The 335 series was sold through Sears in the late 1990s through the 2000s and includes a range of stationary power tools.
For the 335.25926 specifically, the model number is often printed on a label on the column or on the back of the head casting.
Manual Sources
Manuals for the 335.25926 are available from:
- Sears PartsDirect (craftsman.com/partsAndServices/partsDirect) — search the full model number
- eReplacementParts.com — search “Craftsman 335.25926”
- PDF archive sites — this model’s manual circulates as a PDF
The parts diagram in the manual is essential. It shows callout numbers for every component, which you need for accurate parts ordering.
Key Specifications
| Specification | Value |
|---|---|
| Swing | 8 inches |
| Quill travel | Approximately 2 inches |
| Speeds | 5 |
| Motor | Induction, â…“ HP |
| Chuck | JT33 taper, ½-inch capacity |
| Table tilt | ±45° |
Most Commonly Needed Parts
Belt
The 335.25926 uses a single V-belt. The exact length is in the parts manual — look for the belt callout number and cross-reference to the standard industrial size. Alternatively, a link belt cuts to the exact length you need without measurement.
Chuck and Chuck Key
The chuck is JT33 taper. A JT33 replacement chuck is a direct fit. A replacement chuck key in the correct pilot size is worth keeping as a spare — these are consistently the most frequently replaced accessory on any drill press.
Quill Spring
The quill return spring (sometimes called the torsion spring in parts lists) is the second most commonly replaced item. Order by model number from eReplacementParts.com for the correct spring dimensions.
Switch
The on/off switch on the 335.25926 can develop intermittent contact over years of use. A compatible replacement paddle switch or toggle switch of the correct amperage (check the motor nameplate) can be substituted.
Comparing 335-Series to 113-Series Machines
If you’re evaluating a 335.25926 against a used 113-series machine:
| Feature | 335.25926 | 113 Series (113.213850) |
|---|---|---|
| Swing | 8 in | 15½ in |
| Table size | Small | Large (11” × 11”) |
| Parts availability | Moderate (parts portal) | Moderate (eReplParts + eBay) |
| Build era | Late Sears/early post-Sears | Mid-century Sears |
| Chuck taper | JT33 | JT33 |
For serious shop work, the 113-series machines have more table real estate and spindle travel. For compact hobby use, the 335.25926 delivers adequate performance in a small footprint.
Workholding Upgrade
The 8-inch table on the 335.25926 is compact. A 3-inch drill press vise is the right match — it fits without crowding the table, and it makes metalwork and precise woodworking dramatically safer and more accurate.
SEO Metadata
